|Are you seeking or offering?||: I am offering|
|Address||: 127Allama Iqbal Road|
|Phone / Mobile no||: 03214549421|
|Other Information||: Pure water Pure Life|
medicare zfs Domestic Reverse Osmosis |
DOMESTIC REVERSE OSMOSIS SYSTEM
Your Complete Drinking water Solution!
Standard 5 stage RO system with RO-50G/75G/100/200 GPD
Ordinary water filters use a screen to separate only particles of dirt sediment from water.
Reverse osmosis employs a semi permeable membrane that removes not only particles
but also an extremely high percentage of dissolved contaminants-molecule by molecule-
from raw tap water .
Reverse Osmosis is the reversal of the natural flow of osmosis. In a water purification
system, the goal is not to dilute the salt solution, but to separate the pure water from
the salt and other contaminants. When the natural osmotic flow is reversed, water from
the salt solution is forced through the membrane in the opposite direction by application
of pressure-thus the term REVERSE OSMOSIS. Through this process, we are able to
produce pure water by screening out the salts and other contaminants.
Total Dissolved Solids (TDS) are the total amount of mobile
charged ions, including minerals, salts or metals dissolved in
a given volume of water, expressed in units of mg per unit
volume of water (mg/L), also referred to as parts per million
(ppm). TDS is directly related to the purity and quality
of water and water purification systems and affects every
thing that consumes, lives in, or uses water, whether organic
The EPA Secondary Regulations advise a maximum contamination level(MCL) of
500mg/liter(500 parts per million (ppm)) for TDS. Numerous water supplies exceed
this level. When TDS levels exceed 1000mg/L it is generally considered unfit for
human consumption. A high level of TDS is an indicator of potential concerns,
and warrants further investigation. Most often,high levels of TDS are caused by the
presence of potassium, chlorides and sodium. These ions have little or no short-term
effects, but toxic ions (lead arsenic, cadmium, nitrate and others)may also be dissolved
in the water.
Even the best water purification systems on the market require monitoring for TDS
to ensure the filters and/or membranes are effectively removing unwanted particles
and bacteria from your water.
The following are reasons why it is helpful to constantly test for TDS:
High TDS results in undesirable taste which could be salty, bitter, or metallic. It could also indicate the presence of toxic minerals. The EPA's recommended maximum of TDS in water is 500mg/L (500ppm).
2. Filter performance
Test your water to make sure the reverse osmosis or other type of water filter or water purification systems has a high rejection rate and know when to change your filter (or membrane) cartridges.
High TDS indicates Hard water, which causes scale buildup in pipes and valves, inhibiting performance.
A constant level of minerals is necessary for aquatic life. The water in an aquarium or tank should have the same levels of TDS and pH as the fish and reef's original habitat.
TDS is the best measurement of the nutrient concentration in a hydroponics solution.
6. Pools and Spas
TDS levels must be monitored to prevent maintenance problems.
High TDS levels could impede the functions of certain applications.
8. Colloidal Silver Water
TDS levels must be controlled prior to making colloidal silver.
RO Series C Special Features
Mode: Series C
Capacity: 50 GPD/75 GPD/ 200 GPD
Special Display meter.
Built in special Beep Syrian to warn to Replace
Special signal depend on cartridge life.Replace your
cartridge when its signal is dropped.
Display you the temperature and all other features.
Reverse Osmosis Installation .
127 Allama Iqbal Road,Ghari Shahu,, Lahore.